防撞墙模具的使用一般是应用于桥梁边缘处水泥防护墙的制作，预制的前期要先进行钢筋骨架的安置，然后根据施工现场的场地的因素进行安装相应的防模具，这种模具可以随意组装摆放，多少米都是可以完全满足的，一般都是按照50-100米这样为一段距离的使用，防撞墙模具属于组装式拼装模板，它是由多片形式进行组合完成，较明显的优势特点就是能够移动的预制，制作速度快，生产效率高的特点，每一节可以随意设计成为1米-2米的段落，这样为的就是好安装，好拆卸，从而减少人工操作过程中的匮乏，以提升工作效率。

The use of anti-collision wall molds is generally applied to the production of cement protection walls at the edge of bridges. Prefabricated pre-stages must first be arranged with a reinforced skeleton, and then the corresponding anti-molds can be installed according to the factors of the construction site. The molds can be assembled and placed at will. The number of meters can be completely satisfied. Generally, it is used at a distance of 50-100 meters. The anti-impact wall mold is an assembled assembly template. It is composed of multiple forms. The more obvious advantages are the ability to move prefabricated, the speed of production, and the high efficiency of production. Each section can be arbitrarily designed as a paragraph of 1-2 meters. This is to install and disassemble well, thus reducing manual operation. The lack of process, To improve efficiency.